Package
Cat Toy Interactive*1
Remote*1
USB Cable*1
User Manual*1
Silica Gel Tire*2 (Gray+White)
Replaceable Stick*3
Feather*4
Silk Ribbon*1
Product Feature
Product Name: Cat Toy Interactive
Battery: 1000 mAh
Light Source: RGB
Remote Battery: 90 mAh
Remote Distance: 30 m/32.8 ft
USB Cable: Overcharge Protection
Remote Instruction
- On/Offff: Press the on/offff button for 2s.(the side
LED light will flflash and the toy is activated success
fully and vice versa.)
- Manual Mode: The toy will automatically enter
into this mode after being turned on and you can
control its movement via the arrow keys.(pressing
two direction keys at the same time will make the
control invalid)
- Slow Auto Mode: Press the mode key once, and
the toy will be in this mode after the side LED light
flflashes.
- Fast Auto Mode: Press the mode key twice, and
the toy will be in this mode after the side LED light
flflashes.
- Standby Mode: The cat toy will enter the standby
state for 1.5 hours after running for 10 minutes in
auto mode, and restart again for 10 minutes’
working until the auto mode is turned offff or the
battery is exhausted.
- Charging: If the indicator on the remote fails to
light up or the remote is out of control, you should
charge it. The red light is always on during the
charging process and turns offff when be fully
charged.
Cat Toy Interactive Instruction
1.On/Offff: Press the on/offff button once and the toy
will be in manual mode(the side LED light will light
up and the toy is activated successfully and vice
versa.)
- Slow Auto Mode: Press the ON/OFF button once,
the side LED light will flflash and the toy is in this
mode.
- Fast Auto Mode: Press the mode key again, the
side LED light will flflash and the toy is in this mode.
- Offff: Press the ON/OFF button, and the toy will be
powered offff after the side LED light turn offff).
- Charging: If the brightness of the side LED light is
weakened or the speed of the cat is signifificantly
reduced, you need to charge the cat ASAP. The side
LED light flflashes during the charging process and
turns offff when be fully charged.
Attention
- Put the dust plug back after each charge.
- White tire has higher light transmittance.
- Our USB cable is designed with overcharge
protection so the it won’t be damaged if you use the
charger higher than 5V, 1A.
- Due to long-term lack of power or other reasons,
the cat toy interactive will enter the learning mode
after being fully charged(the side LED flflashes
continuously). Press the remote key randomly or any
button on the toy to exit this mode, and then can
operate normally.
- If the remote can’t control the cat toy interactive
well in daily use, you can press the key for 3
seconds to enter the learning mode. Tap the cat toy
interactive and any button on the remote to pair
them, and then it will work normally.